+998 97 771 11 83 Downloads For state customers

Searches models, solutions, projects and pages. For example:

SVO 01 Prom 150W. Industrial suspended luminaires. Sila Sveta. Visualisation based on a photograph of the actual product: the background and lighting are AI-generated, the geometry and construction match the product

Visualisation based on a photograph of the actual product: the background and lighting are AI-generated, the geometry and construction match the product

SVO 01 Prom 150W

Power
150 W
Luminous flux
up to 27,000 lm
Ingress protection
IP54
Mounting height
from 7 m
Dimensions
800×170×75 mm

987,840 UZS

Price includes 12% VAT. Price list dated 21 September 2026.

Request a calculation
Download IES

Where it is used

Factory floors and warehouses with a high ceiling. Against Prom 100W it puts out half again as much flux from one point: fewer fixings, less cable tray, less labour. At low mounting heights it is often too much.

Specification

Power 150 W
Luminous flux up to 27,000 lm 1
Luminous efficacy over 180 lm/W 1
Ingress protection IP54
Colour temperatures 4000 / 5000 / 5700 / 6500 K
Mounting height from 7 m
Dimensions 800×170×75 mm
Housing Extruded aluminium profile
Ambient temperature -30 to +50 °C 2
Rated life 50,000 h (L90), calculated 2
LED lumen depreciation no more than 5 % over the service life 2
Warranty 3 years
SKU svo-01-prom-150
Where the numbers come from
  1. The calculated flux is power × 180 lm/W: an upper bound from the efficacy claimed for the LED modules; the module specification and the report are not published on this site. It is not a measurement of the assembled luminaire: the 2018 IES files give 130 to 140 lm/W. The LM-79 report is in progress; until then, use the flux from the IES file in your design, not the calculated one.
  2. Temperature range, rated life and LED lumen depreciation come from the component supplier's catalogue and the LED vendor's data, not an LM-80/TM-21 report on the assembled luminaire.

We are preparing the data sheet: Ra, percent flicker, UGR, supply voltage. Need one for your specification now? Ask our engineer.

Light distribution curve (IES)
0° 90° 90°

C0-C180 C90-C270

The file is dated 2018 and comes from the HLT model of the same name. The calculated flux in the table above was obtained differently.

Beam angle 74° × 106° (C0 × C90 planes), from the 2018 IES file

Model documents

All downloads

Questions about this model

What is the warranty on the SVO 01 Prom 150W?

The warranty period is 3 years. It covers both failure of the luminaire and a drop in luminous flux; the terms are written into the contract. A faulty luminaire is replaced.

Is there an IES file for the SVO 01 Prom 150W?

Yes, the IES file can be downloaded from this page without a form. It is dated 2018 and comes from the HLT model of the same name. For DIALux it gives the correct shape of the intensity curve; rescale the absolute flux for the power you choose.

Is the luminous flux on the card measured or calculated?

Calculated, from the power and the efficacy claimed for the LED modules. It is an upper bound, not a measurement of the assembled luminaire. The ANSI/IES LM-79 report is in progress; once we have it, the calculated values will be replaced with measured ones. Until then a design should use the flux from the IES file.

What are the production and delivery times?

They depend on the batch size and the production load. We state them in the quotation.

Neighbouring models

Same optics and hardware, different power.

Model images are visualisations based on photographs of the actual products; the background and lighting are AI-generated, the geometry and construction match the product.

All models in the Prom series